Info |
---|
We're here to help! Please contact IDERA support to get assistance with your upgrade. Phone: 713.533.5003 / Email: [email protected] / Web: http://support.uptimesoftware.com |
Uptime Infrastructure Monitor Version 7.
...
10 Release Notes -
...
August 2023
Table of Contents | ||||
---|---|---|---|---|
|
About this Version
...
Info |
---|
This Release Notes document describes changes to the 7.10 release. For more information about the fixed issues in this release, see Resolved Issues at the end of this topic. |
New and Improved Features in Uptime 7.10
Uptime Infrastructure Monitor 7Monitor 7.8 10 includes the following new and improved features.:
Anchor | ||
---|---|---|
|
...
|
...
|
Monitoring of Microsoft Hyper-V virtual machines now is supported in Uptime Infrastructure Monitor 7.8. This support mirrors most of the features already supported for VMware and was testing using Microsoft Windows 2012 R2.
Because the features and functions for VMware and Hyper-V VMs are similar, many of the help wiki topics include information about both platforms. For information specific to Hyper-V, see Monitoring Virtual Environments and Virtual System Monitoring Concepts.
...
Uptime Infrastructure Monitor 7.8 includes improvements to security for Oracle Solaris, IBM AIX, and HP-UX agents by communicating through stunnel and OpenSSL. Both products should be installed on the Agent server before completing the secure install of UT 7.8. If stunnel or OpenSSL is not present, the installer defaults to a regular installation.
...
If you want an Uptime Infrastructure Monitor report to only include data from certain hours during the day, version 7.8 allows you to select those hours from the dropdown lists in the Daily Hours section of the Reports tab. Note that this time is local to the monitoring station. For example, if you want to report to cover the hours from 1:00 a.m. to 1:00 p.m., select 1:00 from the Start dropdown list, and 13:00 from the End dropdown list. For more information about this feature, see Using Reports.
...
The WebLogic Service Monitor is updated to support SSL in Uptime Infrastructure Monitor 7.8. Note that any SSL self-signed certificates manually added to the trusted store is overwritten upon upgrade and must be reinstalled after the upgrade is complete. For more information about this process, see the Application Monitors section about WebLogic.
...
To help VMware SDK product users, this version of Uptime Infrastructure includes support for VMware vSphere SDK version 6.
...
Support for SNMP v1, which was removed in a previous version of Uptime Infrastructure Monitor, is again available to monitor SNMP v1-only devices. You can add an SNMP v1 device by selecting Network Device while in the Add System/Network Device page only.
Improved usability
...
10 includes Apache/PHP/OpenSSL/TLS upgraded to the latest version.
Upgrade Notices
Warning |
---|
Users who have a bundled MySQL database cannot upgrade directly from Uptime Infrastructure Monitor 7.7.3 (MySQL 5.5) to Uptime 7.8.6 or later (MySQL 8.0). You first must upgrade to Uptime 7.8.5 before continuing on to the Uptime 7.8.6 or later upgrade. |
Warning |
---|
If you are running Uptime 7.8.6 with SUSE 12.3, you first must upgrade to SUSE 15.3 before upgrading to Uptime 7.10. |
Info |
---|
Make sure you have enough space before attempting to upgrade to Uptime Infrastructure Monitor 7.10.x. You should have at least 40% free space before beginning the upgrade. |
Upgrade Preparation Steps
Anchor | ||||
---|---|---|---|---|
|
The Uptime Infrastructure Monitor 7.10.x data collector includes a maxpermgen size of 160. This is up from 128 MB in Uptime Infrastructure Monitor 7.7 and earlier. Users who require custom or higher settings can reference the old config file stored at c:\uptime\config-backup\[prior uptime version]\uptime (Windows) or uptime/config-backup/[prior uptime version]/uptime/uptime.jcnf (Linux) and restore the settings after the upgrade. A data collector restart is required. Otherwise the customizations may be lost.
STEP 2: Make necessary Apache configuration changes.
Upgrading the Uptime Monitoring Station will upgrade Apache, PHP, and OpenSSL. This will overwrite the Apache configuration and PHP configuration files. For users who have modified the uptime\apache\conf\httpd.conf or uptime\apache\php\php.ini, the old files will be available in the uptime\config-backup\[old uptime version]\apache\conf and php folders. When the upgrade is complete, customizations can be copied over to the new files. There are several changes in these new configuration files so please do not simply overwrite the file.
STEP 3: Back up the Certificate Store.
The WebLogic Service Monitor is updated to support SSL in Uptime Infrastructure Monitor 7.8.x and later. Also, email round trip service monitors using or any other service using self-signed certificates manually added to the trusted store are overwritten upon upgrade and must be reinstalled after the upgrade is complete. For more information about this process, see the Application Monitors section about WebLogic. Because this is a pain, and you may not be aware this was ever done, it is a good idea to back it up and restore it after an upgrade. Simply back up the uptime/jre/lib/security/cacerts file prior to upgrade. Post upgrade, shut down the Uptime Data Collector (uptime core service in Linux) and Uptime Controller (Win and Linux) services, copy your old cacerts file back into that folder, and start the service up again.
Anchor | ||||
---|---|---|---|---|
|
Users upgrading to Uptime Infrastructure Monitor 7.10.x who previously upgraded to Uptime 7.7.x from an earlier version should back up their MySQL my.ini file before upgrading, make the following change, and then replace the newly-installed my.ini file with the backup after completing the upgrade.
To back up your MySQL.ini file
- Stop your Uptime services.
- In uptime/mysql/my.ini, comment out table_cache=256. This must be commented out because the MySQL 5.7 version is named table_open_cache.
- Search for and, if present, comment out innodb_buffer_pool_instance. This must be commented out because the MySQL 5.7 version is named innodb_buffer_pool_instances.
- Back up uptime/mysql/my.ini.
- Run the Uptime Infrastructure Monitor 7.10.x installer. Note that the upgrade of tables to the new database engine may take from minutes to several hours to complete depending on database size.
- Replace uptime/mysql/my.ini with the backed up version.
Other Upgrade Considerations
Upgrade paths
You can only upgrade directly to Uptime Infrastructure Monitor 7.10.x if your currently installed version is version 7.8.6. Users on version 7.1 must upgrade to version 7.3, then 7.5 before upgrading to 7.7.3, then 7.8.6, 7.9, and finally 7.10. Upgrades are possible across only two minor releases. Users who are running version 6.0 or 6.0.1 must upgrade to 7.0 > 7.1 > 7.3 > 7.5 > 7.7.3 > 7.8.6 > 7.9 > 7.10. For more information, see Upgrading to Uptime Infrastructure Monitor 7.6 and later.
Users who are running version 5.5 or earlier must upgrade to 6.0 or 6.0.1 as a starting point. (Refer to the Uptime Infrastructure Monitor Knowledge Base for specific version upgrade paths.) If you are eligible for a direct upgrade path, you can upgrade using the installer for your Monitoring Station’s operating system. The upgrade process installs new features, and does not modify or delete your existing data.
Refer to one of the following topics if your current version is older than the version required for a direct upgrade:
- Upgrading to Uptime Infrastructure Monitor 7.6 and later
- Upgrading to Uptime Infrastructure Monitor 7.2 through 7.5
- Upgrading to Uptime Infrastructure Monitor 7.1 or earlier
Clustered environment considerations
Users who have a clustered environment should continue using the Uptime 7.7.3 agent. A change in how the UUID is formatted in Uptime 7.8.x and later causes issues when monitoring clusters. For more information about how SQL Server cluster monitoring works in Uptime Infrastructure Monitor, see the IDERA Community article, Monitor MS-SQL Clusters and Always-On Availability Groups.
Apache/PHP/OpenSSL upgrade considerations
Users who manually updated Apache/PHP/OpenSSL in previous Uptime Infrastructure Monitor release using these instructions and who want to upgrade to Uptime Infrastructure Monitor 7.8.2 or later, must perform the following steps before upgrading:
- Open
uptime/conf/httpd.conf
- Change
Listen UIMHTTP
toListen [port on which you want the web server to respond]
i.e.Listen 9999
- Save the file.
- Upgrade to Uptime Infrastructure Monitor 7.8.2 or later.
For more information about manually updating Apache/PHP/OpenSSL, see Manually Update Apache and PHP on Windows and Manually Update Apache and PHP on Linux.
Anchor | ||||
---|---|---|---|---|
|
Users upgrading from Uptime Infrastructure Monitor 7.8.0 to 7.8.2 or later who use MSSQL as a database backend should check their [uptime install folder]\uptime.conf and take note of the drivers used. If the sqljdbc4.jar driver is not being used, nothing needs to be done. Look for:
#To use the sqljdbc4.jar instead of the default jtds jar, uncomment the following two lines, place the jar file in the uptime/core folder and restart the collector service.
If dbDriverClass is uncommented, you should comment it out prior to running the upgrade. If you wish to continue using the MSSQL native JDBC driver, you should copy sqljdbc4.jar out of the [uptime install folder]\core folder prior to upgrading as it will get removed during the upgrade. If this task is not performed, you will notice that the upgrade program fails to reinstall the MSSQL JDBC driver and the upgrade will break.
You must download the sqljdbc4.jar driver for MSSQL (https://www.microsoft.com/en-us/download/details.aspx?id=11774 and put it in the uptime/core directory after the upgrade, uncomment the line we commented prior, and restart Uptime data collector (core in Linux) service to pick up the change.
Changing the Default Uptime Username and Password
Uptime Infrastructure Monitor 7.9 introduced the use of encrypted passwords in the uptime.conf
and uptime-controller.conf
files. In order to change the default Uptime username and password, you must first change them in the datastore (i.e. MySQL, MSSQL, or Oracle). Then use the UptimeConfigUtility tool to apply the changes to the uptime.conf
and uptime-controller.conf
files.
To use this utility
- Open the terminal and change the directory to the scripts folder under the UIM install directory (..\uptime\scripts).
- Below are the details to run the UptimeConfigUtility.
To check all options, use the help command as below:
java -jar UptimeConfigUtility.jar --help
[option] [description]
-path
Path of configuration file must be passed as a first parameter
-t
To set database type
-h
To set hostname
-prt
To set port number
-d
To set database name
-u
To set database username
-pwd
To set database password
To run
java -jar UptieConfigUtility.jar [option] [parameter_value]
For example
java -jar UptieConfigUtility.jar -path C:\uptime.conf -prt 8989 -d testDB
Upgrading Plugins
The Uptime Infrastructure Monitor upgrade process for plugins is as follows:
- Uptime Infrastructure Monitor: The conversion process scans your existing plugins to verify they are based on The Grid (the-grid.uptimesoftware.com).
- User: To complete the plugin conversion process, after upgrading Uptime Infrastructure Monitor proceed to the Extension Manager (Services > Add Service Monitor > Want More? Search for monitors.). Some plugins may be flagged for an upgrade:
- User: Upgrade each plugin.
- User: Moving forward, use this process to manage your plugins.
- User: Users upgrading from versions of Uptime Infrastructure Monitor prior to 7.x.x can uninstall the Plug-in Manager, as it is no longer needed to manage plugins.
Info |
---|
If you have any expiration check service monitors in your environment, please verify that they are working correctly after the upgrade is complete. If you notice an error with SSLv3 handshaking in the status output, please re-create the service monitor. |
Upgrading Gadgets
The Uptime Infrastructure Monitor upgrade process is as follows: Some gadgets were adjusted for 7.8.x and later and will require your attention if you are running on an MS-SQL or ORACLE database back end.
Affected gadgets include:
- Capacity Gadget
- Capacity What-If Gadget
- Metric Chart
- Network Gauge
- Top Resources
For Oracle and MS-SQL users, please install the ODBC driver for your database on the Uptime monitoring station.
The following links and steps help you install the drivers.
Info |
---|
If the database and monitoring station exist on the same machine, then drivers are already installed. Only DSN will need to be created. Also, the exact name as specified in these steps must be used for the connection or the gadgets will not work. If you wish to use a different connection name, you must edit the uptimeDB.php file accordingly. |
Oracle ODBC Driver Linux Installation
- Install unixODBC via your package manager (i.e. yum install unixodbc). This step installs unixODBC into your ‘/usr/lib64/’ directory.
- Download and Install the latest version of the Oracle Instant Client Basic package, available from Oracle at http://www.oracle.com/technetwork/database/features/instant-client/index-097480.html. Keep in mind that Uptime 7.2.x and later come bundled with 64-bit Apache/PHP, so you will need the Linux x86-64 package (i.e. oracle-instantclient12.1-basic-12.1.0.1.0-1.x86_64.rpm). Note that the 12.1 package also works with 11g databases. This package installs some of the required binaries/drivers for Oracle into /usr/lib/oracle/12.1/client64/lib/.
- Download and install the ODBC: Additional libraries package, available from Oracle (i.e. oracle-instantclient12.1-odbc-12.1.0.1.0-1.x86_64.rpm). This package provides the actual ODBC Driver needed.
Edit the /etc/init.d/uptime_httpd script that starts Uptime’s apache, and then add the following lines to set some of the required environment variables. Note that this should be toward the beginning of the script and the end of the other export commands, such as export PATH , export MIBDIRS etc.
export ORACLE_HOME=/usr/lib/oracle/
12.1
/client64
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
Restart the uptime_httpd service to pick up this change.
/etc/init.d/uptime_httpd stop
/etc/init.d/uptime_httpd start
- Make sure to uncomment one of the odbc driver lines in /gadgets/definitions/uptime.Metricgadget/uptimeDB.php as explained above.
Anchor | ||||
---|---|---|---|---|
|
- Install the Oracle Instant Client drivers or have the Oracle Client installed on the monitoring station. To get the Instant Client Download for Oracle, download the 64 bit drivers:
http://www.oracle.com/technetwork/database/features/instant-client/index.html
i.e. instantclient-basic-windows.x64-12.1.0.1.0.zip - Create a new directory C:\Oracle. Unzip the downloaded file into the new directory. You should now have C:\Oracle\instantclient_12_1 which contains a bunch of .dll & .sym files.
- Download the Instant Client Package - ODBC from the same page above, i.e. instantclient-odbc-windows.x64-12.1.0.1.0.zip. Extract this zip into the same C:\Oracle\instantclient_12_1 path.
- Open a command prompt in the C:\Oracle\instantclient_12_1 directory and run the odbc_install.exe which will install the Oracle ODBC drivers and setup the required Environment variables.
- Run the Data Sources (ODBC) utility from the Windows Administrative Tools. Click the Drivers tab, and then confirm that you have an Oracle in instantclient driver listed. Note the name of that driver as this is required as the ODBC Driver Name when setting up the service monitor. (Likely it will be ‘Oracle in instantclient_12_1’ or ‘Oracle in OraClient12Home1’).
- Update the Path Environment Variable to include the path to the Oracle driver. Append “;C:\Oracle\instantclient_12_1” to end of the variable. To set this variable, go to System Properties > Advanced > Environment Variables. Under System variables, find the path and edit it.
- Make sure to uncomment one of the odbc driver lines in /gadgets/definitions/uptime.Metricgadget/uptimeDB.php as explained above.
If you are having trouble with installing just the Oracle InstantClient & ODBC, the likely issue is you are missing the Microsoft Visual C++ 2010 SP1 Redistributable Package (x64) that includes the DLL that this driver needs. Another option is to install these drivers as part of the Oracle Data Access Components which is a bundle of Oracle drivers compared to the zips mentioned above. This bundle can be found on the Oracle website at http://www.oracle.com/technetwork/database/windows/downloads/index.html
Additional MSSQL/SQLServer Installation Steps
In order to use the Metric gadget gadget with a SQL Server-based Datastore, you will need to uncomment the appropriate ODBC Driver in uptime_dir/gadgets/definitions/uptime.Metricgadget/uptimeDB.php.
Windows Based monitoring stations will already have ODBC itself installed as part of Windows, and should be able to use the example provided in uptimeDB.php.
Linux based monitoring stations will require the unixODBC package to be installed. This package should include the /usr/lib64/libtdsodbc.so.0 SQL Server ODBC Driver needed for MSSQL/SQLserver. Which is also the example provided in uptimeDB.php
See Oracle ODBC Driver Linux Installation above for more details on installing unixODBC.
Platform Support and Integration Changes
Visit Uptime Infrastructure Monitor's Knowledge Base for the latest comprehensive listing of currently supported monitoring station, database, and agent platforms. The following tables summarize platform support changes for Uptime Infrastructure Monitor since the previous release. The following icons are used to describe the type of support available in a version:
Supported and tested
Support added in this release
Supported but not tested
Support removed in this release
Warning |
---|
Due to limited usage, we are considering dropping support for the following platforms in a future release:
If this will cause an issue in your environment, please contact Technical Support as soon as possible. |
Monitoring Station
For an expanded list of supported monitoring station platforms, see see Supported Monitoring Station Platforms in Uptime Infrastructure Monitor.
Operating System and Version | Uptime Infrastructure Monitor | ||||
---|---|---|---|---|---|
7.10 | 7.9.x | 7.8.x | 7.7 | 7.6 | |
Red Hat Enterprise Linux 5.10 | |||||
Red Hat Enterprise Linux 6.4 | |||||
Red Hat Enterprise Linux 6.5 | |||||
Red Hat Enterprise Linux 6.7 | |||||
Red Hat Enterprise Linux 7.0 | |||||
Red Hat Enterprise Linux 7.1 | |||||
Red Hat Enterprise Linux 7.2 | |||||
Red Hat Enterprise Linux 7.3 - 8.0 | |||||
Red Hat Enterprise Linux 9.0 | |||||
SUSE Linux Enterprise Server 11.3 | |||||
SUSE Linux Enterprise Server 11.4 | |||||
SUSE Linux Enterprise Server 12.0 | |||||
SUSE Linux Enterprise Server 12.1 | |||||
SUSE Linux Enterprise Server 12.3 | |||||
SUSE Linux Enterprise Server 15.3 | |||||
Windows Server 2008 R2 SP1 | |||||
Windows Server 2012 | |||||
Windows Server 2012 R2 | |||||
Windows Server 2016 | |||||
Windows Server 2019 | |||||
Windows 7 SP1 | |||||
Windows 10 |
Agents
For an expanded list of supported agent platforms, see Supported Agent Platforms in Uptime Infrastructure Monitor.
Windows Systems
Operating System and Version | Agent Version | ||
---|---|---|---|
7.8.x | 7.7 | 7.6 | |
Windows 7 SP1 Professional and Enterprise | |||
Windows 8 Professional and Enterprise | |||
Windows 8.1 Professional and Enterprise | |||
Windows 10 Professional and Enterprise | |||
Windows Server 2008 Standard and Enterprise | |||
Windows Server 2008 R2 Standard and Enterprise | |||
Windows Server 2008 R2 SP1 Standard and Enterprise | |||
Windows Server 2012 Essentials and Standard | |||
Windows Server 2012 R2 Essentials and Standard | |||
Windows Server 2016 Essentials and Standard |
Linux Systems
RPM Agent (x86/64 unless otherwise noted)
Operating System and Version | Agent Version | ||
---|---|---|---|
7.8.x | 7.7 | 7.6 | |
Red Hat Enterprise Linux 5.7 - 5.9 | |||
Red Hat Enterprise Linux 5.10, 5.11 | |||
Red Hat Enterprise Linux 6.4 | |||
Red Hat Enterprise Linux 6.5 | |||
Red Hat Enterprise Linux 6.6, 6.7 | |||
Red Hat Enterprise Linux 6.8 | |||
Red Hat Enterprise Linux 7.0, 7.1 | |||
Red Hat Enterprise Linux 7.2 | |||
Red Hat Enterprise Linux 7.3 | |||
Red Hat Enterprise Linux 7.4 | |||
SUSE Linux Server 10.3 | |||
SUSE Linux Server 10.4 | |||
SUSE Linux Server 11.0 | |||
SUSE Linux Server 11.1 | |||
SUSE Linux Server 11.2, 11.3 | |||
SUSE Linux Server 11.4 | |||
SUSE Linux Server 12 | |||
SUSE Linux Server 12.1 |
DEB Agent (x86/64) only
Operating System and Version | Agent Version | ||
---|---|---|---|
7.8.6 | 7.7 | 7.6 | |
Ubuntu Server 12.04 LTS | |||
Ubuntu Server 14.04 LTS | |||
Ubuntu Server 16.04 LTS | |||
Ubuntu Server 17.04 LTS | |||
Ubuntu Server 18.00 LTS | |||
Debian 7 | |||
Debian 8 |
Unix Systems - AIX
Operating System and Version | Architecture | Agent Version |
---|---|---|
7.8.x | ||
AIX 7.1 TL3 | POWER7 | |
AIX 7.1 TL4 | POWER7 | |
AIX 7.2 TL0 | POWER7 | |
AIX 7.2 TL1 | POWER8 |
Unix Systems - HP-UX
Operating System and Version | Architecture | Agent Version |
---|---|---|
7.8.x | ||
HP-UX 11.31 (11i v3) | PA-RISC/IA64/Itanium |
Unix Systems - Oracle Solaris
Operating System and Version | Agent Version |
---|---|
7.8.x | |
Solaris 10 U9, U10 | |
Solaris 11.0 | |
Solaris 11.1 (SPARC/x86) | |
Solaris 11.3 |
Agentless Monitoring
For an expanded list of supported agentless monitoring platforms, see Supported Agentless Platforms in Uptime Infrastructure Monitor.
IBM pSeries Systems
Platform and Version | Uptime Infrastructure Monitor | ||
---|---|---|---|
7.8.x | 7.7 | 7.6 | |
HMC v6R1.3 | |||
HMC v7R3.x | |||
HMC v7R7.1.0 |
VMware Systems
Platform and Version | Uptime Infrastructure Monitor Version | |
---|---|---|
7.8.x | 7.7 | |
ESX / ESXi 4.1 | ||
ESXi 5.0 | ||
ESXi 5.1 | ||
ESXi 5.5 GA | ||
ESXi 5.5 U1 | ||
ESXi 5.5 U2 | ||
ESXi 5.5 U3 | ||
ESXi 6.0 GA | ||
ESXi 6.0 U1 | ||
ESXi 6.0 U2 | ||
ESXi 6.5 GA | ||
vCenter 4.0 | ||
vCenter 5.0 | ||
vCenter 5.1 | ||
vCenter 5.5 | ||
vCenter 6.0 | ||
vCenter 6.5 | ||
vCenter 7.0 |
WMI Monitoring
Platform and Version | Uptime Infrastructure Monitor Version | |
---|---|---|
7.8.x | 7.7 | |
Windows 7 SP1 Professional and Enterprise | ||
Windows 8 Professional and Enterprise | ||
Windows 8.1 Professional and Enterprise | ||
Windows 10 Professional and Enterprise | ||
Windows Server 2008 Standard and Enterprise | ||
Windows Server 2008 R2 Standard and Enterprise | ||
Windows Server 2008 R2 SP1 Standard and Enterprise | ||
Windows Server 2012 Essentials and Standard | ||
Windows Server 2012 R2 Essentials and Standard | ||
Windows Server 2016 Essentials and Standard |
Databases
For an expanded list of supported databases, see Supported Databases in Uptime Infrastructure Monitor.
Database Type and Version | Uptime Infrastructure Monitor Version | |||
---|---|---|---|---|
7.10 | 7.9.x | 7.8.x | 7.7 | |
MySQL 5.5 64-bit (Bundled) | ||||
MySQL 5.6 64-bit (Bundled) | ||||
MySQL 5.7 64-bit (Bundled) | ||||
MySQL 5.7.21 64-bit (Bundled) | ||||
MySQL 8.0.xx 64-bit (Bundled) | ||||
Oracle 11g R2 (11.2.0.4) | ||||
Oracle 12c (12.1.0.2) | ||||
Oracle 12c (12.2.0.1) | ||||
Oracle 12c R2 (12.2.2.x) | ||||
Oracle 18c | ||||
Oracle 19c | ||||
Microsoft SQL Server 2012 | ||||
Microsoft SQL Server 2012 SP1 | ||||
Microsoft SQL Server 2012 SP3 | ||||
Microsoft SQL Server 2014 SP1 | ||||
Microsoft SQL Server 2016 | ||||
Microsoft SQL Server 2017 | ||||
Microsoft SQL Server 2019 | ||||
Microsoft SQL Server 2022 |
Web Browsers
Uptime Infrastructure Monitor is available on the latest versions of Internet Explorer, Mozilla Firefox, Google Chrome, and Microsoft Edge. For an expanded list of supported web browsers, see Supported Browsers in Uptime Infrastructure Monitor.
Info |
---|
Web Transaction Monitor is Java-based and does NOT work with modern browsers. Creating new monitors is disabled. This monitor works only if your UIM installation already has previously-captured Web Transaction monitor recordings. This does not affect previously-configured Web Transaction Monitors. |
Installing Uptime Infrastructure Monitor
The Uptime Infrastructure Monitor Support Portal provides various documents and articles that guide you through a first-time installation or upgrade.
Installing for the First Time
A complete, first-time deployment of Uptime Infrastructure Monitor and its agents is a straightforward process. Refer to the Installation and Quick Start Guide for complete instructions on performing a first-time installation.
Resolved Issues in 7.10 (Build 178 released 2023-08-10)
UT-18702 | Resolved an issue caused when fetching host names for Service Monitors |
UT-18732 | Resolved an issue causing Service Monitor response time to appear as 0ms |
UT-18796 | Resolved an issue preventing a user from properly deleting records from 'Retained' policy tables |
UT-18804 | Resolved an issue preventing Active Directory synchronization in some environments |
UT-18805 | Resolved an issue causing RHEL errors if no default installation path is used |
UT-18827 | Improved vulnerability protection for MySQL |
UT-18830 | Improved Uptime Active Directory authentication password acceptance |
UT-18865 | Improved vulnerability protection for Apache Log4j 1.2.16 |
UT-18867 | Improved vulnerability protection for Apache/Openssl/PHP/TLS |
UT-18870 | Improved vulnerability protection for VMware Spring Expression DoS |
UT-18871 | Improved vulnerability protection for Java SE |
UT-18872 | Resolved an issue preventing some users from enabling TLS v1.2 Office 365 SMTP |
UT-18873 | Resolved an issue causing some users to see CRIT status in the Outages table on the Global Scan. |
Known Issues
Info |
---|
For Uptime Infrastructure Monitor 7.8.5 and later, the vcruntime140.dll must be installed prior to installing or upgrading. If the .dll is not available during the upgrade or installation process, you may receive a message that the procedure failed.
|
Note |
---|
Users who upgrade to Uptime Infrastructure Monitor 7.8.5 and later may experience issues as a result of the Uptime version number in the Database version (viewed by clicking Help > About Uptime) not changing to the proper version number. This issue only affects you if you run Uptime in UI-only mode where the user interface and datastore are running on two different servers. When starting the UptimeCollector, there is a check to see whether the Uptime version is the same as the Uptime version in the database on the node with the database. When this check fails, the UptimeCollector fails to start on the UI-only node, resulting in a failure to launch the UI. To resolve this issue, you must insert another row with the 7.8.5 Uptime version into the dbversion table with the following command on the DB node: Windows
Linux
MySQL is the default database included with Uptime Infrastructure Monitor. If you are using SQL Server or Oracle, run the following command after logging into your database:
|
Upgrade
- After upgrading from Uptime Infrastructure Monitor 7.6.1 to 7.7.x, an older login page may appear. Click Ctrl + F5 to refresh the page and the new login page appears.
- Users who upgrade from Uptime Infrastructure Monitor 7.7.3 to 7.8.x:
- may notice additional time required when upgrading due to the upgrade of MySQL 5.6 to 5.7
may notice duplicate plugins: Uptime Status General and Uptime Status PerformanceAnchor UT-18763 UT-18763
Anchor | ||||
---|---|---|---|---|
|
A Microsoft DCOM update may cause an issue for some users. When running a WMI check, users may receive the following error on the machine being scanned by WMI:
"The server-side authentication level policy does not allow the user [username] SID ([SID]) from address 111.22.33.44 to activate DCOM server. Please raise the activation authentication level at least to RPC_C_AUTHN_LEVEL_PKT_INTEGRITY in client application.
The following link provides more information from Microsoft:
https://support.microsoft.com/en-us/topic/kb5004442-manage-changes-for-windows-dcom-server-security-feature-bypass-cve-2021-26414-f1400b52-c141-43d2-941e-37ed901c769c.
Anchor | ||||
---|---|---|---|---|
|
The lmhostid returns the value '000000000000' on some occasions. This issue results from Uptime Infrastructure Monitor expecting the primary Network Interface Card (NIC) device name of eth0. If the name is not eth0, issues can result when registering your license.
Use the following workaround to rename your current NIC device name.
Expand | ||
---|---|---|
| ||
If you any questions about this article or the procedure itself or any of the commands contained herein, please contact UIM Support and a member of the team can help. |
Anchor | ||||
---|---|---|---|---|
|
Power Linux Agents have a dependency lm_sensors.so, which is part of lm_sensors-libs package(rpm) on RHEL. If not present, you can obtain this file by running 'yum install lm_sensors-libs' on RHEL platform.
You also can download the file from https://rpmfind.net by searching for lm_sensors-libs (eg : lm_sensors-libs-3.4.0-12.fc28.ppc64.rpm).
Anchor | ||||
---|---|---|---|---|
|
The Citrix XenApp Monitor returns a ' (null): 0x80041010 ' error on some occasions when WMI is in use. Be sure the Citrix WMI service is enabled on the Citrix XenApp host.
Anchor | ||||
---|---|---|---|---|
|
Users who update from Uptime Infrastructure Monitor 7.8.0 to 7.8.3 may notice that the Uptime Agent does not appear in the Windows Control Panel. If this occurs, note that the automatic installation of the Agent did not occur and you must manually start the installation.
Anchor | ||||
---|---|---|---|---|
|
The CPU Utilization Ratio report highlights systems with a CPU ratio over 0.0. However, an error causes Uptime Infrastructure Monitor to highlight all CPU ratio results including values of 0.0
Added Monitoring Station and Agent support for SUSE Linux Enterprise Server 11.4 and 12.1
Uptime Infrastructure Monitor monitoring station and agent now supports SUSE Linux Enterprise Server versions 11.4 and 12.1. For more information about supported platforms, see Supported Monitoring Station Platforms in Uptime Infrastructure Monitor and Supported Agent Platforms.
Added Agent support for AIX 7.1 TL4 and 7.2 TL0; Solaris 11.3; RHEL 6.8; Ubuntu 16.04
Uptime Infrastructure Monitor agent now supports:
- IBM AIX 7.1 TL4, AIX 7.2 TL0
- Oracle Solaris 11.3
- Red Hat Enterprise Linux 6.8
- Ubuntu Server 16.04
For more information about supported platforms, see Supported Agent Platforms.
Added Repository support for MySQL 5.7; plus support for MySQL 5.6; MS SQL Server 2012 SP3, 2014 SP1, and 2016; Oracle 12c
Uptime Infrastructure Monitor 7.8 now ships with MySQL 5.7, which provides greater performance and stability. Uptime Repository now supports MySQL 64-bit, versions 5.6 and 5.7; Microsoft SQL Server 2012 SP3, 2014 SP1, and 2016; plus Oracle 12c. For more information about supported databases, see Supported Databases in Uptime Infrastructure Monitor.
Added browser support for Mozilla Firefox 46 and Google Chrome 51
Uptime Infrastructure Monitor browser now supports Mozilla Firefox version 46 and Google Chrome version 51. For more information about supported browsers, see Supported Browsers in Uptime Infrastructure Monitor.
Limited or removed Monitoring Station platform support for Windows 2008 R2 SP1; RHEL 7.0 and 7.1; SUSE Linux Enterprise Server 11.3 and 12
Uptime Infrastructure Monitor monitoring station no longer supports:
- Windows 2008 R2 SP1 (unsupported)
- Red Hat Enterprise Linux 7.0 (unsupported) and 7.1 (limited support)
- SUSE Linux Enterprise Server 11.3 (unsupported) and 12.0 (limited support)
For more information about supported platforms, see Supported Monitoring Station Platforms in Uptime Infrastructure Monitor.
Limited or removed Agent platform support for Windows 7 SP1, Windows 8.1; RHEL 6.5 - 6.7, 7.0, and 7.1; SUSE Linux Enterprise Server 11.2, 11.3, and 12
Uptime Infrastructure Monitor agent no longer supports:
- Microsoft Windows 7 SP1
- Red Hat Enterprise Linux 6.5
For more information about supported platforms, see Supported Agent Platforms.
Limited agentless Monitoring Station support for Windows 8.1
Uptime Infrastructure Monitor agentless monitoring now provides limited support for Microsoft Windows 8.1. For more information about supported agentless monitoring, see Supported Platforms via Agentless Monitoring.
Removed repository support for MySQL 5.5, MS SQL Server 2012 and 2012 SP1, Oracle 11g R2
Uptime Infrastructure Monitor repository no longer supports:
- MySQL version 5.5
- MS SQL Server 2012 and 2012 SP1
- Oracle 11g R2
For more information about supported databases, see Supported Databases in Uptime Infrastructure Monitor.
Limited or removed browser support for Windows Internet Explorer 10, Microsoft Edge 20, Mozilla Firefox 41, Google Chrome 44 and 45
Uptime Infrastructure Monitor browser no longer supports:
- Windows Internet Explorer version 10
- Microsoft Edge version 20
- Google Chrome version 44
In addition, this version of Uptime Infrastructure Monitor browser provides limited support for Mozilla Firefox version 41 and Google Chrome version 45. For more information about supported browsers, see Supported Browsers in Uptime Infrastructure Monitor.
Platform Support and Integration Changes
Visit Uptime Infrastructure Monitor's Knowledge Base for the latest comprehensive listing of currently supported monitoring station, database, and agent platforms. The following summarizes platform support changes for Uptime Infrastructure Monitor since the previous release.
Monitoring Station
Red Hat Enterprise Linux 7.0 | |
Red Hat Enterprise Linux 7.1 | |
SUSE Linux Enterprise Server 11.3 | |
SUSE Linux Enterprise Server 11.4 | |
SUSE Linux Enterprise Server 12.0 | |
SUSE Linux Enterprise Server 12.1 | |
Windows Server 2008 R2 SP1 |
Agents
AIX 7.1 TL4, 7.2 TL0 | |
Debian 7, 8 | |
Oracle Solaris 11.3 | |
Red Hat Enterprise Linux 6.5 | |
Red Hat Enterprise Linux 6.6, 6.7, 7.0, 7.1 | |
Red Hat Enterprise Linux 6.8 | |
SUSE Linux Enterprise Server 11.2, 11.3, 12 | |
SUSE Linux Enterprise Server 11.4, 12.1 | |
Ubuntu Server Edition 14.04 | |
Ubuntu Server Edition 16.04 | |
Windows 7 SP1 | |
Windows 8 | |
Windows 8.1 | |
Windows Server 2008, 2008 R2, 2012 |
Agentless Monitoring
Microsoft Windows 7 SP1 | |
Microsoft Windows 8 | |
Microsoft Windows 8.1 | |
Microsoft Windows Server 2008 | |
Microsoft Windows Server 2008 R2 | |
Microsoft Windows Server 2012 | |
VMware vCenter (Discovery only) | |
VMware ESXi 5.5 GA | |
VMware ESXi 5.5 U1 | |
VMware ESXi 5.5 U2 | |
VMware ESXi 6.0 GA | |
VMware ESXi 6.0 U1 |
Databases
Microsoft SQL Server 2012 | |
Microsoft SQL Server 2012 SP1 | |
Microsoft SQL Server 2012 SP3 | |
Microsoft SQL Server 2014 SP1 | |
MySQL 5.5 64-bit (Bundled) | |
MySQL 5.6 64-bit (Bundled) | |
MySQL 5.7 64-bit (Bundled) | |
Oracle 11g R2 (11.2.0.4) | |
Oracle 12c |
Web Browsers
Chrome 44 | |
Chrome 45 | |
Chrome 51 | |
Firefox 41 | |
Firefox 46 | |
Internet Explorer 10 | |
Microsoft Edge 20 |
Installing Uptime Infrastructure Monitor
The Uptime Infrastructure Monitor Support Portal provides various documents and articles that guide you through a first-time installation or upgrade.
Installing for the First Time
A complete, first-time deployment of Uptime Infrastructure Monitor and its agents is a straightforward process. Refer to the Installation and Quick Start Guide for complete instructions on performing a first-time installation.
Info |
---|
Windows Installations Only: When running the Uptime Infrastructure Monitor installation on Windows, an initial splash screen appears and then disappears. There is an approximately 5-minute waiting period until the main installer loads. This is due to the installer unpack. You can see two Uptime processes running in task manager. This is normal behavior. |
Upgrade Notices
Warning |
---|
If you are working with a version of Uptime Infrastructure Monitor that is customized in any manner beyond the standard installation downloaded from the Uptime Infrastructure Monitor Web site, contact Technical Support before performing an upgrade. Some customization steps include the following:
|
Info |
---|
If you have any questions or concerns about upgrading, please contact IDERA Support. Phone: 713.533.5003 / Email: [email protected] / Web: http://support.uptimesoftware.com |
Info |
---|
It is important to note that upgrading to Uptime Infrastructure Monitor 7.8 may take 30 minutes or longer to complete because of the upgrade of MySQL from 5.5.x to 5.7. Based on our experience, it requires approximately 1.5 hours for every 50GB of database disk used by MySQL. |
Info |
---|
Make sure you have enough space before attempting to upgrade to Uptime Infrastructure Monitor 7.8. You should have at least 40% free space before beginning the upgrade. |
Upgrade Preparation Steps
...
The Uptime Infrastructure Monitor 7.8 data collector includes a maxpermgen size of 160. This is up from 128 MB in Uptime Infrastructure Monitor 7.7 and earlier. Users who require a higher setting must back up their uptime\datacollector.ini (Windows) or uptime/uptime.jcnf (Linux) before upgrading or they will lose those changes.
...
Users upgrading to Uptime Infrastructure Monitor 7.8 who previously upgraded to Uptime 7.7.x from an earlier version should back up their MySQL my.ini file before upgrading, make the following change, and then replace the newly-installed my.ini file with the backup after completing the upgrade.
Use the following steps:
- Stop your Uptime services.
- In uptime/mysql/my.ini, comment out table_cache=256. This must be commented out because the MySQL 5.7 version is named table_open_cache.
- Search for and, if present, comment out innodb_buffer_pool_instance. This must be commented out because the MySQL 5.7 version is named innodb_buffer_pool_instances.
- Back up uptime/mysql/my.ini.
- Run the Uptime Infrastructure Monitor 7.8 installer. Note that the upgrade of tables to the new database engine may take from minutes to several hours to complete depending on database size.
- Replace uptime/mysql/my.ini with the backed up version.
STEP 3: Make necessary Apache configuration changes.
Upgrading the Uptime Monitoring Station will overwrite the Apache configuration file. For users who have modified the uptime\apache\conf\httpd.conf, we recommend backing up this file prior to performing an upgrade. When the upgrade is complete, customizations can be copied over to the new file or the new file can be overwritten. There are several changes in this new configuration file around timeout and acceptfilter that need to remain in place, so please do not simply overwrite the file.
STEP 4: Back up the Certificate Store.
The WebLogic Service Monitor is updated to support SSL in Uptime Infrastructure Monitor 7.8. Note that any SSL self-signed certificates manually added to the trusted store will be overwritten upon upgrade and must be reinstalled after the upgrade is complete. For more information about this process, see the Application Monitors section about WebLogic. To avoid this occurring, it is easiest to simply back up the uptime/jre/lib/securitycacerts file prior to upgrade. Post upgrade, shut down the data collector (core) service, copy your old cacerts file back into that folder, and start the data collector.
Other Upgrade Considerations
Info |
---|
Users who have a clustered environment should continue using the Uptime 7.7.3 agent. A change in how the UUID is formatted in Uptime 7.8 causes issues when monitoring clusters. For more information about how SQL Server cluster monitoring works in Uptime Infrastructure Monitor, see the IDERA Community article, Monitor MS-SQL Clusters and Always-On Availability Groups. |
You can only upgrade directly to Uptime Infrastructure Monitor 7.8 if your currently installed version is version 7.7.x or 7.6.x. Users on version 7.1 must upgrade to version 7.3, then 7.5 before upgrading to 7.8. Users on version 7.2 or 7.3 must upgrade to 7.5 before upgrading to 7.8. Users who are running version 6.0 or 6.0.1 must upgrade to 7.0 > 7.1 > 7.3 > 7.5 before upgrading to 7.8.
Users who are running version 5.5 or earlier must upgrade to 6.0 or 6.0.1 as a starting point. (Refer to the Uptime Infrastructure Monitor Knowledge Base for specific version upgrade paths.) If you are eligible for a direct upgrade path, you can upgrade using the installer for your Monitoring Station’s operating system. The upgrade process installs new features, and does not modify or delete your existing data.
Refer to one of the following topics if your current version is older than the version required for a direct upgrade:
- Upgrading to Uptime Infrastructure Monitor 7.6 and Later
- Upgrading to Uptime Infrastructure Monitor 7.2 to 7.5
- Upgrading to Uptime Infrastructure Monitor 7.1 or Earlier
Upgrading Plugins
The Uptime Infrastructure Monitor 7.8 upgrade process for plugins is as follows:
- Uptime Infrastructure Monitor: The conversion process scans your existing plugins to verify they are based on The Grid (the-grid.uptimesoftware.com).
- User: To complete the plugin conversion process, after upgrading Uptime Infrastructure Monitor proceed to the Extension Manager (Services > Add Service Monitor > Want More? Search for monitors.). Some plugins may be flagged for an upgrade:
- User: Upgrade each plugin.
- User: Moving forward, use this process to manage your plugins.
- User: Users upgrading from versions of Uptime Infrastructure Monitor prior to 7.x can uninstall the Plug-in Manager, as it is no longer needed to manage plugins.
Info |
---|
If you have any expiration check service monitors in your environment, please verify that they are working correctly after the upgrade is complete. If you notice an error with SSLv3 handshaking in the status output, please re-create the service monitor. |
Upgrading Gadgets
The Uptime Infrastructure Monitor 7.8 upgrade process is as follows: Some gadgets were adjusted for 7.8 and will require your attention if you are running on an MS SQL or ORACLE database back end.
Affected gadgets include:
- Capacity Gadget
- Capacity What-If Gadget
- Metric Chart
- Network Gauge
- Top Resources
Please install the ODBC driver for your database on the Uptime Monitoring Station.
Use the following links and steps when installing the drivers:
For MSSQL
- Download and install the Microsoft ODBC driver 11 or later using the following link:
https://www.microsoft.com/en-us/download/confirmation.aspx?id=36434 - In the gadget code, we use the data source name (DSN) you enter in this step. It is important you use this exact name.
Create a DSN named ODBC Driver for SQL Server in the Windows settings at the following path:
Control Panel > All Control Panel Items > Administrative Tools > ODBC Data Source (64-bit) > System DSN - Enter your database details when creating the DSN.
For Oracle
- Follow the steps mentioned on this article to setup the ODBC driver for Oracle on your machine:
https://tensix.com/2012/06/setting-up-an-oracle-odbc-driver-and-data-source/ - In the gadget code, we use the data source name (DSN) you enter in this step. It is important you use this exact name.
Create a DSN named ODBC Driver for Oracle in the Windows settings at the following path:
Control Panel > All Control Panel Items > Administrative Tools > ODBC Data Source (64-bit) > System DSN - Enter your database details when creating the DSN.
Info |
---|
If database and monitoring station are installed on the same machine, the drivers may already be installed. If this is the case, only the DSN will need to be created. Also, the exact name as specified above must be used for the connection or the gadgets will not work. |
Resolved Issues in 7.8 (Build 7 released 2017-02-02)
UT-17810 | Move DB driver configuration settings to properties file |
UT-17643 | Infrastructure view does not display all elements |
UT-17540 | Agent installation on Solaris Sparc not working |
UT-17517 | Auto-Discovery wizard Add button enabled without any object selection |
UT-17229 | Uptime 7.7.3 needing weekly rebooting due to unresponsive GUI |
UT-17092 | Moving to MS-SQL DataStore causes issues with some gadgets |
UT-17090 | Unable to add a network device on a fresh installation of Uptime 7.7.3 with MS-SQL database backend |
UT-17079 | Controller version displaying Uptime 7.7.2 in Uptime 7.7.3 release |
UT-17073 | User-disabled default threshold values for some monitors return in the next editing session |
UT-17065 | Disk Performance Stats unavailable when using MS-SQL DataStore |
UT-17063 | Upgrade from 7.6.1 failed with multiple errors on Oracle 11g |
UT-17050 | Resource Hot Spot report does not work with MS SQL and Oracle datastores |
UT-16441 | Service Monitor defaults populated on edit |
UT-16440 | Linux Agent Daemon doesn't auto-start on reboot for systemd environments |
UT-16427 | SQL Server (Advanced Metrics) monitor only works with 32-bit Agent |
UT-16416 | Uptime 7.7 displays Database Unavailable error after adding network device |
UT-16392 | Alert Profile Template in Custom Format disappears upon being clicked |
UT-16372 | Allow SNMP Poller to be applied to any element type |
UT-16382 | Add link to help in Installation Size window on Linux |
UT-16368 | Proxy error on some gadgets after upgrading to Uptime 7.7 |
UT-16365 | Create and edit issues on Action Profile in Uptime 7.6.1 |
UT-16360 | Service Monitor Metrics report for ESX (Advanced Metrics) as PDF contains incorrect headers on graph |
UT-16354 | Auto-Discovery Wizard Select All Devices check box not working |
UT-16318 | Uptime not operational after installation on RHEL 7.1 or 7.2 |
UT-16315, UT-16262 | All completed Auto-Discovery Wizard fields are cleared/reset after an error message appears |
UT-16314 | Uptime hangs during monitoring due to leak of DB resources. |
UT16311 | Data Collector unavailable message includes invalid help link URL |
UT-16297 | Linux Agent on Ubuntu 14.04 psinfo error |
UT-16296 | Uptime uninstallation does not remove stunnel |
UT-16292 | Linux Agent on Ubuntu returns wrong OS version |
UT-16288 | Auto-Discovery Wizard adding vCenter before adding WMI / Agentless prevents the wizard from adding services |
UT-16265 | Auto-Discovery Wizard doesn't use all the space of an expanded window |
UT-16259 | Default Agent Service Check monitor contains no criteria for alert |
UT-16228 | Auto-Discovery Wizard finds and adds vCenter server but does not assign servers to groups or create service groups or services |
UT-16227 | Auto-discovery Wizard displays found items even with Hide Items Already Found selected |
UT-16226 | Upgrade to Uptime 7.7 from 7.6.1 is set for SNMP v2 but when you launch the Auto-Discovery Wizard the SNMP v2 checkbox is not selected by default |
UT-16225 | Auto-Discovery Back and Cancel button functionality needs clarification |
UT-16222 | Auto-Discovery Wizard doesn't stop |
UT-16221 | Create new alert profile results in long-running script |
UT-16218 | Remote Reporting functionality is blank under the Config-tab in Uptime version 7.6.1 |
UT-16207 | Allow users to specify where to put discovered VMs |
UT-16179 | Alert/Action Profiles trigger response before updating the element, causing confusing data |
UT-16178 | License Info page displays a message stating the latest version of Uptime is in use even when it is not |
UT-16177 | Edit Alert Profile dialog takes several minutes to load |
UT-16149 | Saving a dashboard with the same name but different capitalization yields an error |
UT-16160 | Values starting with a decimal point returned to Uptime Apache Status monitor get ignored |
UT-16149 | Saving Dashboard with the same name but different capitalization results in error |
UT-16145 | Network discovery fails on the Dashboard > Network link when no network devices exist |
UT-16128 | Weblogic service monitor fails when SSL is enabled |
UT-16124 | Missing agent.cfg option for Agent daemon IP restriction |
UT-16119 | Parsing metrics incorrectly showing zeros in graph and report |
UT-16111 | Agent on Linux or AIX returns incorrect number of Blocked Processes |
UT-16105 | Cannot add agent pSeries LPAR(VIO) and receive message "Error Found, hostname can't be null" |
UT-16094 | Agent installer file names need to indicate 32-bit or 64-bit and use correct Uptime spelling |
UT-16093 | Linux Agent chk4.sh grep/egrep script to find the process count incorrect |
UT-16081 | Arbitrary file upload vulnerability in post2file.php |
UT-16045 | Merge functionality of HTTP monitor, IIS Webpage plugin, and SOAP plugin |
UT-16031 | Highchart CPU Usage graph y-axis range larger than range of data points |
UT-16015 | File System Capacity Growth report displays excluded file systems |
UT-16007 | Allow user to specify which group elements are assigned when adding vCenter |
UT-15998 | Reattached service monitors cannot be detached and edited |
UT-15996 | Highchart CSS file references incorrect path name and causes graph crashes |
UT-15975 | Resource Usage report displays black outlines in the graph and scheduled report |
UT-15944 | AIX Agent should use lsps -s instead of pstat -s in perfparse.sh |
UT-15938 | Add ability to configure and schedule reports that cover only a period of time in a day |
UT-15888 | HP system displays partial info for network interfaces with names longer than 8 characters |
UT-15887 | Increase buffer return size for Web service monitor |
UT-15880 | Recreating VMs in vCenter does not successfully convert to VM+Agent when UUID is changed |
UT-15867 | ESX Hosts with Unlicensed status and licenses exceeded |
UT-15831 | Windows Element Pages In/sec always displays 0 |
UT-15827 | Issues with monitoring station support for RHEL 7.x |
UT-15814 | Index needed on ranged_object table to improve query times |
UT-15812 | Alert profile not removed from master service monitor |
UT-15800 | Adding a network device with no string value present for any index value displays an error |
UT-15613 | Improve security for Solaris, AIX, HP-UX Agents |
UT-15528 | Action Profile should not save password in plain text |
UT-15432 | SNMP poller does not retain metrics |
UT-15098 | Detach/reattach service group member monitor causes name conflict error |
PLUG-369 | Capacity Planning What-If reporting MB instead of GB on y-axis for DataStore |
PLUG-325 | SNMP Poller needs generic SNMP functionality |
PLUG-304 | Metric Chart gadget Memory graph displays negative values |
PLUG-302 | Resource Scan gadget missing from extensions.JSON |
PLUG-281 | IIS Webpage Check needs a threshold setting based on the HTTP status |
PLUG-275 | Oracle Extendable Tablespace Check plugin XML definition: Percent Free label should be Percent Used |
PLUG-277 | Move functionality from Cisco Router CPU and Memory Monitor into SNMP Poller |
PLUG-266 | FS Capacity Logical Disk doesn't recognize a single backslash in a path for exclusions |
PLUG-256 | NetApp Monitor fails immediately if SNMP is unavailable |
Known Issues
Upgrade
...
.
Anchor | ||||
---|---|---|---|---|
|
...
fail (Uptime Infrastructure Monitor 7.8.2 only, resolved in 7.8.3)
When running running apt-get update
and and apt-get upgrade
, the following error is caused by missing LSB tags and overrides from from /opt/uptime-agent/bin/upt_daemon.sh
:
...
To prevent compatibility issues please add the following LSB tags and override to the header of of upt_daemon.sh
:
### BEGIN INIT INFO INFO
# Provides: uptime-agent-daemon daemon
# Required-Start: $local_fs $network $network
# Required-Stop: $local_fs fs
# Default-Start: 2 3 4 5 5
# Default-Stop: 0 1 6 6
# Description: Uptime Agent Deamon Deamon
### END INIT INFO
New installations may not launch the Auto-Discovery Wizard from installer
If the user does not launch Uptime Infrastructure Monitor from the installer and does not receive the Auto-Discovery Wizard upon opening the product, change the URL to:
localhost:9999/autoDiscoveryWizard.php
Note that entering only localhost:9999
does not automatically run the wizard.
Uninstallation may not stop stunnel.exe process
When uninstalling Uptime Infrastructure Monitor, the uninstall does not automatically stop or kill the stunnel.exe
process. In order to delete the Uptime directory during uninstallation, the user first must kill the stunnel.exe
process.
Creating Alerts panel updates
The Create Alert panel no longer includes the Fill button or Custom Format check box. The default text automatically disappears when the user clicks within the body of the email. The best workaround is to create the alert using the default text. Copy the body of the message text in the View Alert Profile. Next, edit the alert, and then paste the text copied from the message body and make any necessary changes.
...
Anchor | ||||
---|---|---|---|---|
|
The Uptime Infrastructure Monitor Linux installer assumes Apache should be or is installed in /usr/local/apache, but it checks where Uptime is installed. This causes the user to have two different install paths for Uptime, which causes Apache to fail.
New installations may not launch the Auto-Discovery Wizard from installer
If the user does not launch Uptime Infrastructure Monitor from the installer and does not receive the Auto-Discovery Wizard upon opening the product, change the URL to:
localhost:9999/autoDiscoveryWizard.php
Note that entering only localhost:9999
does not automatically run the wizard.
Uninstallation may not stop stunnel.exe process
When uninstalling Uptime Infrastructure Monitor, the uninstall does not automatically stop or kill the stunnel.exe
process. In order to delete the Uptime directory during uninstallation, the user first must kill the stunnel.exe
processThis release includes an issue that prevents the Resource Usage report from including Hyper-V elements in the selection list. This issue will be addressed in a future release.
Anchor | ||||
---|---|---|---|---|
|
Legacy code used in implementing the Wait I/O report for elements using a Windows agent is causing the report to display 0 instead of a proper value. In comparison, the same stat returned when using a Linux agent shows the correct value. This issue will be addressed in a future release.
...
Switching to an alternative MS SQL JDBC driver (sqljdbc4.jar) may cause the UptimeDataCollector service to crash at startup. To avoid this issue, navigate to the SQL Server property by going to Server properties > Connection > Default Connection Options > no count, and clearing the checkboxis causing the report to display 0 instead of a proper value. In comparison, the same stat returned when using a Linux agent shows the correct value. This issue will be addressed in a future release.
Virtual Machine issues
In the Quick Snapshots for both VMware and Hyper-V, the Swap Usage vs. Swap Space sometimes displays '0 undefined.' This issue will be addressed in a future release.
Contacting Support
IDERA employees are proud to work with our clients around the globe to deliver exceptional customer service, including sales expertise, installation help, and support services.
...
Sales [email protected]
Support [email protected] / http://support.uptimesoftware.com
Human Resources IDERA Careers
Copyright ©
...
2023 IDERA, Inc.
IDERA, Inc. considers information included in this documentation to be proprietary. Your use of this information is subject to the terms and conditions of the applicable license agreement.
Save
Save
Save
Save