Sizing varies based on the number of monitors per element, the type of objects monitored, and the method used to gather performance data.  Uptime Infrastructure Monitor recommendations are based on an average of 2 or 3 monitors per element.

During Uptime Infrastructure Monitor's installation, one of three options was selected depending on the size of your monitored environment. The choice determined how certain resources were allocated, and subsequent hardware requirements:

ElementsMinimum RAMMinimum CPU Type
< 2008 GB4-cores/vCPUs
201 - 100032 GB8-cores/vCPUs
1001 - 5000128 GB24-cores/vCPUs

As a general rule of thumb when planning the allocated disk space, you should plan on allocating about 4 GB per monitored element. Note that per element usages are per year, unless you archive using old data.

Each sizing example ensures the underlying configurations (for example, for the bundled MySQL database and JRE) match the likely resource demands to generate reports, dashboards, and perform queries. The following summarizes these configurations:

Configuration Parameter< 200 Elements201 - 1000 Elements1001 - 5000 Elements
MySQL buffer pool size180 MB3 GB8 GB
MySQL log file size30 MB768 MB2 GB
MySQL maximum open connections201301551
Java heap size2 GB4 GB8 GB
service threads75150300
Data Collector maximum open connections150250500
Uptime Controller heap size768 MB1536 MB4096 MB

Modifying the Sizing Examples

After initial installation, if you need to accommodate a larger number of monitored Elements, you can manually change the sizing examples using one of two methods: 

The first, more direct, option is to individually modify parameters that make up a template. This allows you to deviate somewhat from the prescribed configuration values for a template:

Configuration ParameterConfiguration File and Location
(relative to the Uptime Infrastructure Monitor  directory)
Parameter Name

Default Sizing Values
(< 200, 201 - 1000,
1001 - 5000)

MySQL buffer pool size/mysql/my.iniinnodb_buffer_pool_size=

180M
3G
8G

MySQL log file size/mysql/my.iniinnodb_log_file_size=30M
768M
2G
MySQL maximum open connections/mysql/my.inimax_connections=201
301
551
Java heap size

Linux:
/uptime.jncf

Windows:
\UptimeDataCollector.ini

Linux:
-Xmx<size>

Windows:
vm.heapsize.preferred=

Linux:
-Xmx2G -Xmx4G
-Xmx8G

Windows: -2 GB
-4 GB
-8 GB

service threads/uptime.confserviceThreads=75
150
300
Data Collector maximum open connections/uptime.confconnectionPoolMaximum=150
250
500
Uptime Controller heap size

Linux:
/controller/service/start.sh

Windows:
\controller\service\UptimeController.ini

Linux:
-Xmx<size>

Windows:
vmarg.2=

-Xmx768m
-Xmx1536m
-Xmx4096m

The recommended option to change a sizing example is to use the sample configuration files that are found in the <uptimeInstall>/sample directory as a starting point. This option moves you to a different sizing example in the least amount of steps.

Modifying Sample Templates

Update the DataStore configuration:

  1. Stop the DataStore service (uptime_datastore on Linux, or "Uptime Data Store" on Windows)
  2. Move the ib_logfile0 and ib_logfile1 files, found in the <uptimeInstall>/datastore/data/ directory, to a backup location.
  3. Back up the MySQL my.ini configuration file, which is found in the <uptimeInstall>/mysql/ directory.
  4. Copy the <uptimeInstall>/sample/<size>/<os>/my.ini template file to the <uptimeInstall>/mysql/ directory, replacing the existing one.
  5. Edit the my.ini file, replacing all $VARIABLE$ instances with values that match your Uptime Infrastructure Monitor deployment (for example, $DATASTORE_PORT$ and $USER_INSTALL_DIR$)
  6. Start the DataStore service
    You can confirm the change was successful by referring to the <uptimeInstall>/datastore/data/<hostname>.err log. Look for output similar to the following:

    140110 14:26:28 InnoDB: Initializing buffer pool, size = 3.0G
    140110 14:26:29 InnoDB: Completed initialization of buffer pool
    140110 14:26:29  InnoDB: Log file .\ib_logfile0 did not exist: new to be created
    InnoDB: Setting log file .\ib_logfile0 size to 768 MB
    InnoDB: Database physically writes the file full: wait...
    InnoDB: Progress in MB: 100 200 300 400 500 600 700
    140110 14:26:33  InnoDB: Log file .\ib_logfile1 did not exist: new to be created
    InnoDB: Setting log file .\ib_logfile1 size to 768 MB
    InnoDB: Database physically writes the file full: wait...
    InnoDB: Progress in MB: 100 200 300 400 500 600 700

Update the Uptime Data Collector configuration:

  1. Back up the uptime.conf file, which is found in the <uptimeInstall>/ directory.
  2. Back up the Data Collector configuration file (uptime.jcnf on Linux, or UptimeDataCollector.ini on Windows), which is found in the <uptimeInstall>/ directory.
  3. Copy the uptime.conf, and uptime.jcnf or UptimeDataCollector.ini files from the <uptimeInstall>/sample/<size>/<os>/ directories to the <uptimeInstall>/ directory, replacing the existing ones.
  4. Edit both files, replacing all $VARIABLE$ instances with values that match your Uptime Infrastructure Monitor deployment (for example, the $MS_STRING_FS$ classpath variable, and $DATASTORE_HOST$).
  5. Restart the Uptime data-collection service (uptime_core on Linux, or "Uptime Data Collector" on Windows)

Update the Uptime Controller configuration:

  1. Back up the Uptime Controller configuration file:
    • Linux: the start.sh script, which is found in the <uptimeInstall>/controller/service/ directory
    • Windows: the UptimeController.ini configuration file, which is found in the <uptimeInstall>\controller\service directory
  2. Copy the start.sh or UptimeController.ini file from the <uptimeInstall>/sample/<size>/<os>/ directory to the <uptimeInstall>/controller/service/ directory, replacing the existing one.
  3. Edit the file, replacing all $VARIABLE$ instances with values that match your Uptime Infrastructure Monitor deployment.
  4. Restart the Uptime Controller service (uptime_controller on Linux, or Uptime Controller on Windows)

Update the Uptime Web server:

  1. Back up the php.ini Uptime Web server configuration file, which is found in the <uptimeInstall>/apache/conf/ directory.
  2. Copy the php.ini file from the <uptimeInstall>/sample/<size>/<os>/ directory to the <uptimeInstall>/apache/conf/ directory, replacing the existing one.
  3. Edit the file, replacing all $VARIABLE$ instances with values that match your Uptime Infrastructure Monitor deployment (for example, $USER_INSTALL_DIR$).
  4. Restart the Uptime Web server (uptime_httpd on Linux, or "Uptime Web Server" on Windows).
  • No labels