| Note |
|---|
Not planning to do this module? You can skip to the next section. |
This module consists of the following exercises:
...
- Click My Infrastructure, then click Auto Discovery in the left pane.
- In the Auto Discovery pop-up, confirm that you want to Discover Servers and Network Devices on Your Network, and click Next.
- In the next step, select Network Devices with SNMP, and ensure the Use Global SNMP Connection Configuration check box you defined in the previous exercise is selected.
Enter the subnet or an IP address range, similar to above.
Info title Pro Tip Although we are keeping things simple, and using a single subnet or IP address range as shown above, there are other ways to point up.time at subnets and subnet ranges to expedite the Auto-Discovery process. See Using Auto Discovery for more information.
- Click Next to start the Auto Discovery process.
- When all network devices on the subnet or subnet range have been detected, you will be able to make selections to add to your up.time inventory. Select an SNMP device, similar to below:
- Scroll to the bottom of the Auto Discovery list, and click Add. As a final step, you will receive confirmation that the network device is now part of your monitored inventory.
- Click Done.
...
| Section | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
|