Standalone Monitoring for Virtual Machines
To facilitate simpler virtual asset management, you can automatically add VMs that belong to a VMware
...
or Hyper-V server topology to Uptime Infrastructure Monitor when that
...
server is added as an Element.
...
The VM server collects the metrics used to monitor these VMs. Despite this setup simplicity, you occasionally may want the virtual machine to host the Uptime Infrastructure Monitor Agent; doing so enables options that are not otherwise available. For example, via the Uptime Infrastructure Monitor Agent, you can use an Action Profile that performs self-healing steps on a mission-critical VM.
In this type of scenario, you can, from Uptime Infrastructure Monitor’s configuration perspective, "detach" a VM from the VMware vCenter VM server hierarchy that was originally imported, in order to control it independently of the vCenter server. Once performed, this VM is "promoted" to receive additional performance data delivered by the Uptime Infrastructure Monitor Agent, or for Windows systems, via WMI.
Although the topology remains intact on the VMware vSphere VM server side, from Uptime Infrastructure Monitor’s perspective, the VM is a standalone Element.
If the VMware vCenter VM Server is configured for additional data collection (the Collect Uptime Agent dataMonitoring option, found in the Additional Agent or WMI Monitoring section of the VMware vCenterVM server's General Information page, is enabled), any VM that is part of a VMware vCenter VM server inventory is automatically "promoted" to be independently monitored when either the Uptime Infrastructure Monitor Agent is installed on it, or it is configured to use WMI for metrics retrieval.
This behavior is controlled by the additional data collection settings for the vCenterVM server, which were first configured (or skipped) when the VMware vCenter server was first added to Uptime Infrastructure Monitor. you You can modify these additional data collection settings at any time, after which Uptime Infrastructure Monitor searches for appropriate VMs.
Understanding rescan time intervals
The frequency at which Uptime Infrastructure Monitor checks for Agent-enabled VMs is based on the Rescan Time Interval setting
...
. By default, the scan of VM server guest VMs for the presence of an agent or WMI will happen when the host is first added to Uptime Infrastructure Monitor. If a VM is powered off or suspended at the time of initial addition, the presence of an agent or access via WMI to collect OS level metrics will not happen. Once VMs are powered on or when new VMs are created, the regular interval of 180 minutes (3 hours) will take effect. Due to this regular interval, the guests OS may be seen at any point in time during this window. Users who are adding new VMs often or who have lots of change in their virtual inventory may wish to set this setting lower. Inventory configurational refreshes happen ever 15 seconds by default. This behavior updates guest configuration as provisioned by the host, along with OS version information if available. This is not related to agent or WMI scan interval.
To change the scan interval, edit the VM host as desired. In the Additional Agent or WMI Monitoring section, click Edit Settings. Make your change to the Rescan Time Interval, and then be sure to save it. You must restart the Uptime Data Collector service after making the change for it to take effect.
Configuring Standalone VM Candidacy Scanning
To configure the method with which Uptime Infrastructure Monitor scans Hyper-V host or VMware vCenter server VMs for eligibility for standalone monitoring:
- In the Infrastructure panel, click the gear icon beside the Hyper-V host or VMware vCenter server, and then select View.
- On the Element profile page, ensure the Info tab is selected.
- On the main profile page, locate the Additional Agent Monitoring section, and then click Edit Settings.
If desired, modify the Rescan Time Interval setting.
Info When you change this interval, the previous scan is completed before adjusting to the new setting.
Configure the data collection details with which candidate VMs are configured to collect metrics:
For the Uptime Infrastructure Monitor Agent, indicate the port on which it is listening, and whether it securely communicates with Uptime Infrastructure Monitor using SSL.
For data collection via WMI, indicate the host and domain on which WMI is implemented, and the username and password required for access.
Info If a VM is detected to have both the Uptime Infrastructure Monitor Agent as well as WMI credentials, Uptime Infrastructure Monitor marks the VM for standalone monitoring via the Agent.
Click Save.
- If you changed the Rescan Time Interval setting, you must restart the Uptime Data Collector service for this change to take effect.
Modifying Data Collection Details for an Existing Standalone VM
For individual VMs that were scanned and discovered using standalone VM settings, you can make changes to their data collection method by doing the following:
- In the Infrastructure panel, click the gear icon beside the WMI- or Agent-based VM you wish to modify.
- In the pop-menu, select View.
- On the VM’s profile page, ensure the Info tab is selected.
- On the main profile page, in the Data Collection section, click Edit Collection Method.
- In the pop-up configuration window, modify the details for the existing data collection method for the VM:
- For the Uptime Infrastructure Monitor Agent, indicate the port on which it is listening, and whether it securely communicates with Uptime Infrastructure Monitor using SSL.
- For data collection via WMI, indicate the host and domain on which WMI is implemented, and the username and password required for access.
- Click Save.
- When the pop-up window closes, you can make sure the settings you have provided are correct by clicking the Test button.
Detaching Ignored VMs
Any VM whose parent object is marked as ignored cannot individually be added to the monitored list. (See Managing vCenter Inventories in Uptime Infrastructure Monitor for more information.) In these cases, any ignored VM that is a candidate for standalone monitoring is shown with an accompanying Enable Monitoring button, found on the Hyper-V host or VMware vCenter server’s Info page:
Enabling Standalone Monitoring on Ignored VMs
To remove an ignored VM from Uptime Infrastructure Monitor’s mirrored inventory of the Hyper-V host or VMware vCenter server, do the following:
- Ensure the Uptime Infrastructure Monitor Agent is installed on the VM Element, or that Uptime Infrastructure Monitor is configured to use WMI as a data collection method for Windows-based Elements.
For more information, see Configuring Global Data Collection Methods. - In the Infrastructure panel, click the gear icon beside the Hyper-V host or VMware vCenter server, then in the pop-menu, select View.
- On the Element profile page, ensure the Info tab is selected.
- Click Inventory (Hyper-V) or Inventory Detail (vCenter).
- On the Inventory Detail page, from the Ignored Elements list, locate the VM Element you wish to enable for standalone monitoring.
All VMs that are part of the Hyper-V or VMware vCenter server’s inventory that are found to be eligible for standalone monitoring are listed with a corresponding Enable Monitoring button. Click Enable Monitoring.
Info Enabling standalone monitoring for a VM permanently detaches it from the host server’s configuration in Uptime Infrastructure Monitor.
Repeat these steps for each VM.
All VMs that are detached for standalone monitoring no longer appear in Uptime Infrastructure Monitor as part of the Hyper-V host or VMware vCenter server’s inventory, or as a virtual machine, and instead appear and report as a physical Element.